C-23 Collar Zinc Anode Zinc with straps This anode does not fit

This anode does not fit 2017 and later -C and -D saildrive models: 130S-C

These boat zincs are drilled for bolt-on attachment 6" center to center hole Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion

F225 & LF225 4-Stroke - All Models

The bolts holding the actuator to the plane must be removed and the zinc installed using the same bolt holes and the long bolts (1/4-20 x 1-1/4”) included in the kit

Inside Diameter: 5"

C-23 Collar Zinc Anode Zinc with straps This anode does not fitInside Diameter: 5 1 2" Outside Diameter: Weight: Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers. Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better. Zimar collar zincs meet the standards set