Dimmer Plug JeeBoot the load is ~40mA depending

the load is ~40mA depending on wind speed)

This plug has 16 outputs

such as 2x AA batteries

and the slim grey plastic ABS box as the two mating half shells for which the Carrier Board was designed

The pin order of the header matches an FTDI RS232 cable (this is correct for the JeeNode / BBB / RBBB / LilyPad / Arduino Pro pin header)

Dimmer Plug JeeBoot the load is ~40mA dependingThe Dimmer Plug is a small board containing the PCA9635 16 channel PWM LED driver. This driver communicates directly over I2C. There is a DimmerPlug class in the JeeLib library to interface with this driver, to set up to 16 individual light levels and blinking. Discrete transistors or MOSFETs, as well as Darlington arrays can be added to drive more LEDs or incandescent lamps in series or in parallel. An I2C bus running at 3. 3V is used as