Simpson MBHU5.50/18KT Masonry Beam Hanger 5-1/2x18 in 10-Ga G90 Galv w/Anchors and Screws Deck-Drive DCU Screw Plugs How far below the surface

How far below the surface is the tie countersunk after installation

with H1 and H2 heights of 6

always use the replacement bit that matches the specification indicated on your Quik-Drive screw box label or the original bit label

05 is a 5-piece Forstner bit set with 8-10mm shanks for drilling flat-bottomed holes in wood

which is especially important in overhead and horizontal installations

Simpson MBHU5.50/18KT Masonry Beam Hanger 5-1/2x18 in 10-Ga G90 Galv w/Anchors and Screws Deck-Drive DCU Screw Plugs How far below the surfaceThe Simpson Strong Tie MBHU5. 50 18KT MBHU 5 1 2 in. x 18 in. Galvanized Masonry Beam Hanger with Screws Anchors is a face mounted connector designed for attaching beams to masonry or concrete walls. This non welded, one piece connector is suitable for solid sawn and engineered wood beams as well as trusses, and comes complete with the Titen HD screw anchors and Strong Drive SDS Heavy Duty Connector screws needed for installation. Because the Titen HD